Council Directive 93/93/EEC of 29 October 1993 on the masses and dimensions of two or three-wheel motor vehicles
Coming into Force | 16 November 1993 |
End of Effective Date | 31 December 2015 |
Celex Number | 31993L0093 |
ELI | http://data.europa.eu/eli/dir/1993/93/oj |
Published date | 14 December 1993 |
Date | 29 October 1993 |
Official Gazette Publication | Official Journal of the European Communities, L 311, 14 December 1993 |
Council Directive 93/93/EEC of 29 October 1993 on the masses and dimensions of two or three-wheel motor vehicles
Official Journal L 311 , 14/12/1993 P. 0076 - 0082
COUNCIL 93/93/EEC DIRECTIVE of 29 October 1993 on the masses and dimensions of two or three-wheel motor vehicles
THE COUNCIL OF THE EUROPEAN COMMUNITIES,
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100a thereof,
Having regard to Council Directive 92/61/EEC of 30 June 1992 relating to the type-approval of two or three-wheel motor vehicles(1) ,
Having regard to the proposal from the Commission(2) ,
In cooperation with the European Parliament(3) ,
Having regard to the opinion of the Economic and Social Committee(4) ,
Whereas the internal market comprises an area without internal frontiers in which the free movement of goods, persons, services and capital is ensured; whereas the measures necessary for its operation should be adopted;
Whereas with regard to their masses and dimensions, in each Member State two or three-wheel vehicles must display certain technical characteristics laid down by mandatory provisions which differ from one Member State to another; whereas, as a result of their differences, such provisions constitute barrier to trade within the Community;
Whereas those barriers to the operation of the internal market may be removed if the same requirements are adopted by all the Member States in place of their national rules;
Whereas it is necessary to draw up harmonized requirements concerning the masses and dimensions of two or three-wheel motor vehicles in order to enable the type-approval and component type-approval procedures laid down in Directive 92/61/EEC to be applied for each type of such vehicle;
Whereas, given the scale and impact of the action proposed in the sector in question, the Community measures covered by this Directive are necessary, indeed essential, to achieve the aim in view, which is to establish Community vehicle type-approval; whereas that aim cannot be adequately achieved by the Member States individually;
Whereas the provisions of this Directive should not oblige those Member States which do not allow two-wheel motor vehicles on their territory to tow a trailer to amend their rules,
HAS ADOPTED THIS DIRECITVE:
Article 1
This Directive together with its Annex shall apply to the masses and dimensions of all types of vehicle as defined in Article 1 of Directive 92/61/EEC.
Article 2
The procedure for the granting of component type-approval in respect of the masses and dimensions of a type of two or three-wheel motor vehicle and the conditions governing...
To continue reading
Request your trial