Council Regulation (EEC) No 1730/90 of 20 June 1990 temporarly suspending the autonomous common customs tariff duty on certain industrial products (in the chemical and allied sectors)

• Published date: 29 June 1990
• Subject Matter: CCT: derogations,Commercial policy
• Official Gazette Publication: Official Journal of the European Communities, L 164, 29 June 1990

|

Council Regulation (EEC) No 1730/90 of 20 June 1990 temporarly suspending the autonomous common customs tariff duty on certain industrial products (in the chemical and allied sectors)

Official Journal L 164 , 29/06/1990 P. 0001 - 0028

COUNCIL REGULATION (EEC) No 1730/90 of 20 June 1990 temporarily suspending the autonomous Common Customs Tariff duty on certain industrial products (in the chemical and allied sectors)

THE COUNCIL OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Economic Community, and in particular Article 28 thereof,

Having regard to the proposal from the Commission,

Whereas production of the products referred to in this Regulation is at present inadequate or non-existent within the Community and producers are thus unable to meet the needs of user industries in the Community;

Whereas it is in the Community's interest in certain cases to suspend the autonomous Common Customs Tariff duties only partially, particularly because of the existence of Community production, and in other cases to suspend them completely;

Whereas, taking account of the difficulties involved in accurately assessing the development of the economic situation in the sectors concerned in the near future,

these suspension measures should be taken only

temporarily, by fixing their period of validity by reference to the interests of Community production,

HAS ADOPTED THIS REGULATION:

Article 1

The autonomous Common Customs Tariff duties for the products listed in the tables appearing in the Annexes shall be suspended at the level indicated in respect of each of them.

These suspensions shall apply:

-from 1 July to 30 September 1990 for the product listed in the table apearing in Annex I,

-from 1 July to 31 December 1990 for the products listed in the table appearing in Annex II,

-from 1 July 1990 to 30 June 1991 for the products listed in the table appearing in Annex III.

Article 2

This Regulation shall enter into force on 1 July 1990.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Luxembourg, 20 June 1990.

For the CouncilThe PresidentD. J. O'MALLEY

ANNEX I

ex 2712 90 901-Alkenes of a chain-length of 18 carbon atoms or more but not exceeding 30 carbon atoms0

ANNEX II

ex 2843 90 90 ex 3004 90 99Carboplatin (INN)0

ex 2903 30 10Carbon tetrafluoride (tetrafluoromethane)0

ex 2907 29 906,6,6-Tri-tert-butyl-4,4,4-(1-methylpropan-1-yl-3-ylidene)tri-m-cresol, whether or not

containing toluene of crystallization0

ex 2908 10 904,4-(Perfluoroisopropylidene)diphenol0

ex 2910 90 001,2-Epoxybutane0

ex 2918 19 90Pravastatin sodium (INNM)3,5

ex 2918 19 90Ammonium (3R,5R)-7-[(1S,2S,6R,8S,8aR)-8-(2,2-dimethylbutyryloxy)-1,2,6,7,8,8a-hexahydro-2,6-dimethyl-

1-naphthyl]-3,5-dihydroxyheptanoate3,5

ex 2918 29 90Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate0

ex 2926 90 902-Cyanoacetamide0

ex 2926 90 90(-)-N-(a-Cyano-4-hydroxy-3-methoxy-a-methylphenethyl)acetamide0

ex 2928 00 00Carbidopa (INN)0

ex 2929 10 00m-Isopropenyl-a,a-dimethylbenzyl isocyanate0

ex 2930 90 80Probucol (INN)3,8

ex 2931 00 902-Chloroethylphosphonic acid3,8

ex 2932 29 90Etoposide (INN)0

ex 2933 39 902-(4-Pyridyl)ethanesulphonic acid0

ex 2933 59 901,4-Diazabicyclo[2.2.2]octane (triethylenediamine)0

ex 2933 90 60Estazolam (INN)4

ex 2934 90 60Etizolam (INN)4

ex 2934 90 60Clotiazepam (INN)4

ex 2934 90 60Teniposide (INN)0

ex 2935 00 00Sulfadimethoxine (INN) and its sodium salt3,3

ex 2940 00 90Ribose0

ex 2941 10 00Piperacillin (INN)4,1

ex 2941 10 00 ex 3004 10 10Piperacillin sodium (INNM)3,6

ex 2941 30 00Minocycline (INN) and its salts0

ex 2941 90 00Josamycin (INN)2,7

ex 2941 90 00Josamycin propionate (INNM)2,7

ex 2941 90 00Midecamycin (INN) and its acetates2,7

ex 2941 90 00Rokitamycin (INN)2,7

ex 2941 90 00Clindamycin (INN) and its salts and esters0

ex 2941 90 00Kanamycin sulphate (INNM)0

ex 2941 90 00Lincomycin (INN) and its salts and esters, for the manufacture of medicaments of heading No 3003 or 3004 (a)0

ex 2941 90 00Cefotetan (INN)0

ex 2941 90 00Ceftizoxime sodium (INNM)0

ex 2941 90 00Cefotiam dihydrochloride (INNM)0

ex 2941 90 00Cefmenoxime hemihydrochloride (INNM)0

ex 2941 90 00 ex 3004 20 90Amikacin (INN) and its salts0

ex 3004 90 19Purified collagen dispersed in a phospate physiological saline solution, whether or not containing lidocaine (INN)3

ex 3004 90 99Preparation containing des-1-alanine-(125-serine) interleukin-2 (human), obtained from genetically-manipulated Escherichia coli0

ex 3701 91 00Film in the flat, put up in disc form and incorporated in a cartridge5,3

ex 3802 90 00Acid-activated montmorillonite, for the manufacture of self-copy paper (a)0

ex 3805 20 00Pine oil1,7

ex 3805 90 00Crude dipentene1,7

ex 3815 90 00Catalyst, consisting of dialkyldimethylammonium acetate of chain-lengths of 16 and 18 carbon atoms, suspended in organic solvents to a concentration by weight of 40% or more0

ex 3901 10 90Polyethylene, containing by weight 0.25% or more of carbonyl groups in the chain, in the form of pellets0

ex 3901 20 00Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity

of 0.945 or more but not more than 0.985, for the manufacture of typewriter ribbon or similar

ribbon (a)0

ex 3901 90 00Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid4

ex 3901 90 00Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid0

ex 3903 90 00Copolymer, entirely of maleic anhydride with styrene, or entirely of maleic anhydride with styrene and an acrylic monomer, whether or not containing a styrene-butadiene block copolymer, in one of the forms mentioned in note 6 (b) to Chapter 390

ex 3906 90 00Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (NBR)0

ex 3907 20 90a-4-Hydroxybutyl-o-hydroxypoly(oxytetramethylene), containing less than 1 mg/kg of halogen and of metal, and of a colour not exceeding 20 units on the Hazen scale0

ex 3909 40 00Polycondensation products of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 micrometres0

ex 3911 90 10Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene), in one of the forms mentioned in note 6 (b) to Chapter 393,5

ex 3919 90 31 ex 3920 62 00 ex 3921 90 19Polyethylene terephthalate film, dyed in the mass, of a thickness not exceeding 25 micrometres and metallized on one side6

ex 3920 42 11 ex 3920 42 91Reflecting polyvinyl chloride sheeting, wholly embossed on one side in a regular pyramidal pattern, not containing microspheres0

ex 3920 62 00 ex 3920 63 00 ex 3920 69 00Reflecting polyester sheeting embossed in a regular pyramidal pattern, not containing microspheres0

ex 3920 62 00 ex 3920 69 00 ex 3921 90 19Iridescent film of polyester with polyethylene0

ex 3920 99 50Film of a mixture of polyvinylidene fluoride with an acrylic polymer, of a thickness of 40 micrometres or more but not exceeding 60 micrometres0

ex 4811 21 00Impregnated paper coated or covered with a pressure-sensitive self-adhesive layer, the whole:

-of a tensile of 2200 N/m or more but not exceeding 3400 N/m (as determined by the DIN 53455 method),

-of a stretch factor of 3,0% or more but not exceeding 4,5% (as determined by the DIN 53455 method)

and of adhesivity on stainless steel (as determined by the Finat FTM 1 method):

-of 50 N/m or more but not exceeding 225 N/m, at a temperature of 23C (+/- 3C) and a relative humidity of 50% (+/- 5%)

-not exceeding 250 N/m after aging for three weeks at a temperature of 70C

0

ex 5509 41 10 ex 5509 41 90 ex 5509 42 10 ex 5509 42 90Flame-resistant textile-fibre yarn, containing by weight 85% or more of acetalised polyvinyl alcohol [vinylal (ISO)] and not more than 15% of modal (ISO)0

ex 5603 00 93 ex 5603 00 95Nonwovens of polypropylene consisting of a melt-blown central layer, laminated on each side with spun-bonded fibres, of a thickness not exceeding 550 micrometres and of a weight not exceeding

80 g/m2, in the piece or simply cut into rectangular shape, not impregnated0

ex 5911 10 00Needle-punched synthetic fibre felts on a woven synthetic fibre base not containing polyester, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration pro-

ducts (a)0

ex 5911 10 00Needle-punched polyester felts on a woven polyester base, coated or covered on one side with polytetrafluoroethylene film, of a weight not exceeding 500 g/m2, for the manufacture of filtration products (a)0

ex 6305 10 10Sacks and bags, of a kind used for the packing of goods, used, of jute or of other textile bast fibres of heading No 53030

ex 6305 90 00Sacks and bags, of a kind used for the packing of goods, used, of flax or of sisal0

ex 6903 20 90 ex 6914 90 90Yarn of continuous ceramic filaments, each filament containing by weight 12% or more of diboron trioxide, not more than 26% of silicon dioxide and 60% or more of dialuminium trioxide0

ex 6909 19 00Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces of roughly circular, square, rectangular, oval or asymmetrical cross-section, of an overall volume not exceeding

65 000 ml, and of an external dimension of 20 mm or more but not exceeding 1 800 mm, having, per 100 mm2 and running parallel to the main axis of symmetry, not less than one continuous channel which may be open at both ends or stopped at one end, with a total channel cross-sectional area of 10% or more but not exceeding 90% of the whole cross-sectional area0

ex 8111 00 11Electrolytic manganese of a purity by weight of 99.7% or more, for the manufacture of non-ferrous alloys (a)0

ex 8112 99 30Alloy of niobium (columbium) and...